| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Vehicle Exterior | Section: Exterior Panels/Trim | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000003GJR000X |
| Title: EXTERIOR PANELS / TRIM: REAR BUMPER: REMOVAL (2008 Sequoia) | ||
REMOVAL
1. REMOVE REAR QUARTER PANEL MUDGUARD LH
(a) Remove the 9 screws.
(b) Remove the clip and rear quarter panel mudguard.
2. REMOVE REAR QUARTER PANEL MUDGUARD RH
HINT:
Use the same procedure as for the LH side.
3. REMOVE REAR BUMPER COVER
(a) Apply protective tape as shown in the illustration.
|
(b) Remove the 8 bolts, 2 screws and 2 clips. |
|
(c) Disengage the 2 harness clamps and disconnect the connector. |
|
(d) Disengage the 12 claws and remove the rear bumper cover. |
|
|